Slipfree is an antislip product for treating slippery floors and surfaces to make them slip resistant and non slip to prevent slipping, falling and accidents to adhere to Spanish Technical Construction Code (CTE)

The surface should be cleaned regularly using standard methods.

Do not use cleaning products that are abrasive or leave residues, it’s preferable to use neutral liquid detergents

In case of not complying with the outlined requirements, it is recommended to clean the area thoroughly once a month, using a soft brush along with abundant soapy water

The cleaning staff, or company in charge of doing so, should be aware of these recommendations

TECHNICAL ASPECTS AND MAINTENANCE FOR SURFACES.

slipfree is a clear fluid that changes the molecular structure of mineral surfaces. When applied, it opens thousands of microscopic pores per cm2, which are homogeneously distributed on the surface, creating a suction effect between the shoe sole and wet surfaces.

It is especially designed for use in areas that are potentially slippery: internal wet areas such as bathrooms, kitchens, dining rooms, fishmongers, butchers, etc.., also outdoor areas such as swimming pools, porches, stairs, ramps, decks, terraces etc ….

slipfree is available in a variety of products to suit each type of pavement, such as: ceramic tiles (gres, porcelain, Catalan tiles, rustic gres, rustic tiles, tiles) granite, polished natural stone, travertine marble, concrete surfaces, porcelain/or enamel bathtubs and showers

Once applied on a surface the effect is permanent without changing any aspects of its initial appearance, nor its strength, hardness, etc..

Guarantee on this type of treatment depends on the surface and its use, generally lasting several years.

The treatment does not require of any renovation and can be used immediately after applying.

Lydicce and CEMEX Laboratories have conducted tests on the characteristics of the product.

Our Company will include the inspection and test of the areas to be treated carried out by our qualified staff, in order to determine the surface coefficient of friction before and after the treatment, using the American Slip Meter.

MAINTENANCE

The surface must be cleaned regularly, preferably using our multipurpose cleaner, known as slipfree Detergent.

Do not use any abrasive cleaning products or that add layers to clean treated areas, use only neutral based liquid detergents.

It is recommended that once a month you clean the base thoroughly, using a soft brush along with abundant soapy water rubbing and rinsing the area throughout.

Cleaning Company/staff in charge, should be aware of these recommendations.

Please do not hesitate to contact us for any additional maintenance information info@slipfree.es

Bathtubs and showers During FIVE years from the date when applied. We guarantee that the surface treated with slipfree non slip solution retains its "Slip resistance”, as long as the surface is cleaned and maintained with an appropriate grease remover and has followed our maintenance instructions. If you feel for whatever reason that the surface has lost its Slip Resistance, please return the original Guarantee Certificate by post or fax, along with 6 EUROS for delivery costs per bath or shower and we will replace the product at no extra charge.

Advice for bathrooms:
For a complete non slip effect always clean your bath or shower from any residual bath gels, oils and creams. It is recommended that once a month you clean the base thoroughly, using a soft brush along with abundant soapy water rubbing and rinsing the area throughout.
DO NOT APPLY OUR PRODUCTS ON BATHS AND SHOWER SURFACES THAT HAVE BEEN
RESTORED, PAINTED PREVIOUSLY OR ONES MADE OF FIBRE GLASS.
THIS PRODUCT MUST ONLY BE APPLIED TO BATHS AND SHOWERS WITH PORCELAIN AND OR/ ENAMEL FINISHES